功能：可以分離叠放在料桶内的工件，由一個雙作用氣缸將工件逐個推出，推至料台上進行沖壓，或推至輸送站進行下檢測、加工；
結構组成：
1.鋁板：250mm寬整板無拼接鋁型材，350mm長，裝有四個防滑墊；
2.控制面板：包含4個按鈕輸入，分别對應啟動、停止、重置、手自動，包含4個指示燈輸出，分别對應啟動、停止、自定義Q1和自定義Q2；
3.供料模塊，由料倉、雙作用氣缸、雙電控電磁閥、磁性開關等組成；
4.沖壓模塊，由單作用氣缸、單電控電磁閥、料台等組成；
5.接線端子，UK2.5接線端子，配套純銅接線柱芯，可接線實訓也可用實驗導線實驗；
6.附件，線槽、導軌等；
7.便携收納箱：收納箱為一體成型擠出設計，上蓋有可隱藏把手，前面旋鈕鎖又可用于堆叠其他收納箱，尺寸：400*300*350。
技術數據：
- 工作氣壓：0.4～0.6Mpa
- 電源電壓：24 V DC
- 圓形工件尺寸：最大 40 mm
- 外形尺寸：350×250×300mm
培訓内容：
1.氣動技術基礎
2.傳感器技術：電磁限位開關
3.管路連接和線路連接
4.單片機自動化工程程序設計
 
Function Overview
This device can separate workpieces stacked in a material barrel. It uses a double-acting cylinder to push out the workpieces one by one, sending them to the workbench for stamping or to the conveyor station for inspection and processing.
 
Structure Components
Aluminum Plate
Size: 250mm wide, 350mm long
Features: Continuous aluminum profile without joints, equipped with four non-slip pads
Control Panel
Inputs: 4 buttons (Start, Stop, Reset, Manual/Auto)
Outputs: 4 indicator lights (corresponding to Start, Stop, Custom Q1, and Custom Q2)
Feeding Module
Composed of: Material bin, double-acting cylinder, double electric control solenoid valve, magnetic switch
Stamping Module
Composed of: Single-acting cylinder, single electric control solenoid valve, workbench
Terminal Blocks
Type: UK2.5 terminal blocks, equipped with pure copper terminal pins
Function: Supports wiring training and experimental leads
Accessories
Includes: Wire troughs, guide rails, etc.
Portable Storage Box
Design: One-piece extrusion design
Features: The lid has a concealed handle, the front has a rotary lock that allows stacking with other storage boxes
Size: 400mm x 300mm x 350mm
 
Technical Data
Operating Pressure: 0.4–0.6 Mpa
Power Voltage: 24 V DC
Round Workpiece Size: Maximum 40 mm
Overall Dimensions: 350mm x 250mm x 300mm
 
Training Content
Basics of Pneumatic Technology
Sensor Technology: Electromagnetic Limit Switches
Pipe and Wiring Connections
Microcontroller Automation Program Design